Page 1 of 2
Looking for a gunsmith in South East Mighigan
Posted:
Mon Dec 28, 2015 3:02 pm
by Hunting dog
Hello All, I am a long time shooter but a new member to this site. Since you are so knowledgeable on these types of topics I though I would ask for some advice. My goal is to built a 200-250 yard deer hunting rifle in the 450 Bushmaster cartridge which is now legal in Southern Michigan. I bought a new Savage 12FV in 308 as the basis for this project. My intention is to buy a barrel from Apache Gun Works which will be a Green Mountain stainless steel 24" long with 1:16 twist in the heavy varmint contour. My question is if anyone can recommend a good gunsmith near me who can put this together. Any additional advice you can provide would be appreciated as well. Thanks.
Re: Looking for a gunsmith in South East Mighigan
Posted:
Thu Dec 31, 2015 3:21 pm
by AR Sarge
Check with Adco Firearms in Sylvania, OH. They've done some barrel threading for me and their work is wonderful.
www.adcofirearms.com
Re: Looking for a gunsmith in South East Mighigan
Posted:
Thu Dec 31, 2015 4:53 pm
by Al in Mi
How far south and east are ya?
it's not hard to swap barrels on a Savage if your inclined to try it yourself.
Re: Looking for a gunsmith in South East Mighigan
Posted:
Thu Dec 31, 2015 7:22 pm
by Hoot
For a while, there was a fellow selling 450b barrels threaded for the Savage short action receivers. If you have the barrel nut wrench and a headspace gauge set, you can change calibers in a half an hour including dis and reassembly. I have two model 12s and 5 different caliber barrels between them. Two pieces of oak 2x4 from an old pallet and a hole saw are all you need to make a barrel block set that you can clamp in a vise.
Hoot
Re: Looking for a gunsmith in South East Mighigan
Posted:
Sat Jan 02, 2016 3:15 pm
by Hunting dog
I am near Imlay City in Lapeer County. About where the Thumb joins the Mitten in Michigan talk.
Re: Looking for a gunsmith in South East Mighigan
Posted:
Sat Jan 02, 2016 4:12 pm
by Al in Mi
check with Williams Gunsite, see if they'd do it.
Re: Looking for a gunsmith in South East Mighigan
Posted:
Sat Mar 05, 2016 8:57 am
by Cutright
There is a guy in Grand Blanc that builds 450's on Savages and sells them on Gun Broker. You can find him on there and call. He seems like a good guy
Re: Looking for a gunsmith in South East Mighigan
Posted:
Fri Apr 08, 2016 1:30 pm
by dhm0148
Hello,
I'm new to this forum but could not help but see your request for someone in Southeastern Michigan to build a 450 Bushmaster for you. I had one built last year on a Savage Axis action and am highly please with it for both looks and accuracy. The person who built it for me is a fellow named Norm Fox in Grand Blanc, Michigan. I don't know if he is still building them or not but you might drop him an email and ask. His email address is:
[color=#0040FF]normanfox4570@yahoo.com[/color]
Good luck and good shooting.
Re: Looking for a gunsmith in South East Mighigan
Posted:
Sat Apr 09, 2016 5:43 pm
by Cutright
That is the guy I talked to that was on Gun Broker. He is a very nice guy and quite the talker
Re: Looking for a gunsmith in South East Mighigan
Posted:
Wed Apr 27, 2016 4:18 pm
by bullnose
Cutright wrote:That is the guy I talked to that was on Gun Broker. He is a very nice guy and quite the talker
Absolutely correct on both counts. Norm is a good guy.