by Bmt85 » Tue May 28, 2019 7:55 am
I went the route of ordering from X-caliber when they had a sale going, I think they still do. I’m doing the same thing, mostly subs with the 425 Maker’s, maybe some supers. I went with a 10.5”pistol gas 1/16” twist, with standard 11/16 threading. I also went stainless so I didn’t have to coat it. Also planning on running an SLR adjustable gas block.
BHW is another choice with there 1:18 twist. Should stabilize them.
After that it’s probably going to be finding a 1/16 twist midlength barrel and sending it out to be cut down and re-profiled.
One thing I can across though, a guy running a 45 Vrap with I believe a 11.5” carbine length gas system, was able to cycle subs, with a suppressor for sure, don’t remember if it ran unsurpressed, probably not.