450Bushmaster.net

Two different 45's in my basket! 250, & 225's

Just a friendly heads up!, get them while they last!

CW

cwlongshot wrote:Two different 45's in my basket! 250, & 225's

Just a friendly heads up!, get them while they last!

CW

Got the same email this morning but was too busy to investigate until just now.They also have a deal on 240gr XTP Mags.

Links:

250 ftx 20.99/50-ct
https://www.midwayusa.com/product/376189/factory-second-muzzleloading-bullets-45-caliber-452-diameter-250-grain-tipped-boat-tail-box-of-50-bulk-packaged

225 ftx 24.49/100-ct
https://www.midwayusa.com/product/284129/factory-second-bullets-45-caliber-452-diameter-225-grain-polymer-tip-expanding-box-of-100-bulk-packaged

240xtp mag 25.89/100-ct
https://www.midwayusa.com/product/725250/factory-second-bullets-45-caliber-452-diameter-240-grain-jacketed-hollow-point-magnum-box-of-100-bulk-packaged

Hoot

pg 4 I think had boat tailed ML bullets??

Al in Mi wrote:pg 4 I think had boat tailed ML bullets??

I wonder about that listing. The picture looked like a flat base FTX but the fuzziness looked like the all copper ones they have on occasion. If it had been the latter, for sure, I would have been on them like a cat on a flightless bird. Its literally been years since they had the blem/seconds 250gr all coppers on sale. I'm on the notify list for them. The last time I got notified, I was almost done driving home from work. By the time I got inside and booted the PC to order some, they were already gone.

Hoot

Bought a few boxes of 225’s. Accuracy from the regular production bullets is incredible, I hope the seconds are as good. The 6.8 seconds I’ve bought from Midway in the past have been gtg.

Got mine today, and can’t tell that they’re seconds. After a quick inspection they all look great.

I got a couple of boxes of the 225s and they measure .450" Is this normal for the FTX?
I think there must have been something on my digital dial caliber when I zeroed it before measureing them. With a manual caliper they measure .452", With a micrometer they mostly read .4518-9"
Sorry for the confusion
Glenn.

Lar45 wrote:I got a couple of boxes of the 225s and they measure .450" Is this normal for the FTX?
thanks
Glenn.

Not at all!

I'd be checking them with a second micrometer just to be sure. I've bought my share of those 225 seconds and never had them vary by more than .0005

Hoot

Lar45 wrote:I got a couple of boxes of the 225s and they measure .450" Is this normal for the FTX?
I think there must have been something on my digital dial caliber when I zeroed it before measureing them. With a manual caliper they measure .452", With a micrometer they mostly read .4518-9"
Sorry for the confusion
Glenn.

Don't apologize Glenn. I doubt there is a member here (myself included) who hasn't been bit in the butt by crazy caliper readings. The good news is that it all worked out for you.

Hoot

They're BACK....

https://www.midwayusa.com/product/40422 ... k-packaged