Re: Unique for subsonic 400gr?
Posted: Thu Nov 26, 2020 2:45 pmHey gang. I've been experimenting with cast and Unique in a Ruger Scout.
So far I've done an MP Molds 300gr "Ruger" HP, a Lee 405gr FP, and an RCBS 405gr FP (420gr as cast)with the gas check shank machined off. All were sized at .452"
12 grains of Unique in the 305 and 10 grains in the 405's.
OAL 2.265" for the MP and Lee. 2.290" for the RCBS.
All fed very well and went bang, more of a function test than accuracy but they all worked. I'll bring my chrono next time.
Stay tuned.....
PS - Happy Thanksgiving from your northern neighbours.
So far I've done an MP Molds 300gr "Ruger" HP, a Lee 405gr FP, and an RCBS 405gr FP (420gr as cast)with the gas check shank machined off. All were sized at .452"
12 grains of Unique in the 305 and 10 grains in the 405's.
OAL 2.265" for the MP and Lee. 2.290" for the RCBS.
All fed very well and went bang, more of a function test than accuracy but they all worked. I'll bring my chrono next time.
Stay tuned.....
PS - Happy Thanksgiving from your northern neighbours.