CFE BLK 300 grainers result

Talk about your 450b reloading experience, ask questions, etc...

Moderator: MudBug

Forum rules
Please try and keep it safe!

This information is the responsibility of the community, not the forum. 450bushmaster.net is not responsible if you blow yourselves up.

CFE BLK 300 grainers result

Postby scottteddy » Thu Nov 26, 2020 5:22 pm

Ill start out with a quick tale. took my Ruger #1 in 450 BM with the 1 in 10 twist out for deer and shot a nice 166lb manitoba white tail at 70 yards with the hornady factory 250. worked great no blood for the first 10 yards then a big bucket spill every 10 feet. Deer went about 30 to 40 yards , lungs were liquid.

now that the season is done for me I got to reloading. I used Lee 4 die set, starline brass, federal match SR primers, cfe blk, hornady xtp 300's and sst muzzleloader 300's.

groups are measured from edge of hole to furthest edge of hole, shot from a bipod at 100 yards in -2 degrees Celsius. I usually shoot from a bench while sighting in and I shot these groups pretty quick because I was laying in snow.

after seeing hoots range report I decided to start at 41.5 grains, this is higher than what Hodgdon states is max, there was some slight flattening of the primers but not bad. I cant say how the pressure will be in any other rifle than my own.

the SST seated to 2.300 3 shot , 0.4 inch group, average speed 1968 fps ( two shots through same hole)

the xtp seated to 2.055 3 shot group 0.7 inch group, average speed 1999 fps

was surprised the sst grouped about an inch and a bit lower than the xtp. Recoil was fine , I dont really notice it with the brake and wearing a coat but I also dont find my 338 win mag all that bad ether so take with that what you will.

I plan on trying 42 and 42.5 grain but am more than happy with this load
scottteddy
 
Posts: 3
Joined: Thu Nov 26, 2020 4:51 pm

Re: CFE BLK 300 grainers result

Postby Al in Mi » Thu Nov 26, 2020 6:42 pm

I have a #1 with a 10t barrel and its shot everything great.

Where abouts in Mb do you hail from? I've done a bunch of bear hunting by The Pas.
User avatar
Al in Mi
 
Posts: 1987
Joined: Sat Jun 20, 2009 8:24 am

Re: CFE BLK 300 grainers result

Postby scottteddy » Thu Nov 26, 2020 6:46 pm

Im in the south east area , 30 minutes north of the border at Warroad MN. I havent been up to hunt the Pas , but hear the game is great up there.
scottteddy
 
Posts: 3
Joined: Thu Nov 26, 2020 4:51 pm

Re: CFE BLK 300 grainers result

Postby Al in Mi » Fri Nov 27, 2020 6:26 am

I've pretty much settled on the 275gr Barnes seated 2.410ish over a big dose of 300MP.

CFE I need to try at some point when I find some again.

Image

Image
User avatar
Al in Mi
 
Posts: 1987
Joined: Sat Jun 20, 2009 8:24 am

Re: CFE BLK 300 grainers result

Postby scottteddy » Fri Nov 27, 2020 11:16 pm

I originally wanted to start out with those barnes bullets but they are hard to come by around here, Ive ordered some speer deep curls 300 grain yhough and hope to use them on the spring bear hunt
scottteddy
 
Posts: 3
Joined: Thu Nov 26, 2020 4:51 pm


Return to Reloading for the 450b

Who is online

Users browsing this forum: Google [Bot] and 89 guests

cron