Talk about your 450b reloading experience, ask questions, etc...
Moderator: MudBug
Forum rules
Please try and keep it safe!
This information is the responsibility of the community, not the forum. 450bushmaster.net is not responsible if you blow yourselves up.
by Savage16Shooter » Thu Aug 18, 2022 3:06 pm
Has anyone worked up a Sub-sonic load with the Hornady 395 gr Sub-X bullet, now that they have released it as a component bullet? The lowest velocity Hornady shows on the addendum page for their reloading manual with that bullet is 1300 fps. A call to the tech department revealed that they have a special multi-powder mix they developed and therefore can't recommend any loads for commercially available powder.
-
Savage16Shooter
-
- Posts: 3
- Joined: Sun Feb 14, 2021 5:05 pm
by Al in Mi » Fri Aug 19, 2022 2:26 am
here's a thread asking the same without much luck.
viewtopic.php?f=5&t=17010you running a AR platform or bolt gun?
-
Al in Mi
-
- Posts: 1987
- Joined: Sat Jun 20, 2009 8:24 am
by Savage16Shooter » Fri Aug 19, 2022 11:27 am
Thanks for finding that previous post for me. I searched prior to posting and did not find anything on the 395 gr. hornady Sub-x. I am running AR platform/suppressed, which of course adds potential cycling problems to the mix compared to bolt. I had previously worked with the Makers 350 gr and Accurate #9, but kept getting stability/keyholing problems at Sub-sonic velocities (AR barrel is 1:24).
-
Savage16Shooter
-
- Posts: 3
- Joined: Sun Feb 14, 2021 5:05 pm
Return to Reloading for the 450b
Who is online
Users browsing this forum: No registered users and 157 guests