I also got my flash hole deburring tool Here is what I removed from the flash holes of 31 cases.
Been getting prepared!
Moderator: MudBug
Forum rules
Please try and keep it safe!
This information is the responsibility of the community, not the forum. 450bushmaster.net is not responsible if you blow yourselves up.
Please try and keep it safe!
This information is the responsibility of the community, not the forum. 450bushmaster.net is not responsible if you blow yourselves up.
5 posts
• Page 1 of 1
Been getting prepared!
by Stealthshooter » Tue Aug 23, 2011 11:48 am
Well I got my Lee FCD modded today!! The top of the crimp ended up being .067" from the case mouth and the crimp groove ended up being .0535" wide.
I also got my flash hole deburring tool Here is what I removed from the flash holes of 31 cases.
I also got my flash hole deburring tool Here is what I removed from the flash holes of 31 cases.
Last edited by Stealthshooter on Tue Aug 23, 2011 7:45 pm, edited 1 time in total.
- Stealthshooter
- Posts: 508
- Joined: Mon Mar 28, 2011 9:50 pm
Re: Been getting prepared!
by Stealthshooter » Tue Aug 23, 2011 12:50 pm
I also took the seating plug out of the seating die and put a bit of an angle on the end and polished it up. It got rid of the little ring it was leaving on the bullets while seating.
- Stealthshooter
- Posts: 508
- Joined: Mon Mar 28, 2011 9:50 pm
Re: Been getting prepared!
by wildcatter » Tue Aug 23, 2011 7:30 pm
Stealthshooter wrote:Well I got my Lee FCD modded today!! The top of the crimp ended up being .67" from the case mouth and the crimp groove ended up being .535" wide. Try it again, I bet this might not be the right size..t
I also got my flash hole deburring tool Here is what I removed from the flash holes of 31 cases.
[ http://i871.photobucket.com/albums/ab278/shayn8103/IMG_20110823_110929.jpg ]
Safety First..t
-
wildcatter - Posts: 2914
- Joined: Sat Jun 06, 2009 8:30 pm
- Location: In the Middle of Deer Central Station or better known as, in the Thumb of Beautiful Michigan
Re: Been getting prepared!
by Stealthshooter » Tue Aug 23, 2011 7:44 pm
wildcatter wrote:Stealthshooter wrote:Well I got my Lee FCD modded today!! The top of the crimp ended up being .67" from the case mouth and the crimp groove ended up being .535" wide. Try it again, I bet this might not be the right size..t
I also got my flash hole deburring tool Here is what I removed from the flash holes of 31 cases.
[ http://i871.photobucket.com/albums/ab278/shayn8103/IMG_20110823_110929.jpg ]
Dang your right I forgot the 0 in front can't believe I did that!! .0535" wide and .067" from the case mouth!!
- Stealthshooter
- Posts: 508
- Joined: Mon Mar 28, 2011 9:50 pm
Re: Been getting prepared!
by wildcatter » Wed Aug 24, 2011 6:46 pm
Stealthshooter wrote:wildcatter wrote:Stealthshooter wrote:Well I got my Lee FCD modded today!! The top of the crimp ended up being .67" from the case mouth and the crimp groove ended up being .535" wide. Try it again, I bet this might not be the right size..t
I also got my flash hole deburring tool Here is what I removed from the flash holes of 31 cases.
[ http://i871.photobucket.com/albums/ab278/shayn8103/IMG_20110823_110929.jpg ]
Dang your right I forgot the 0 in front can't believe I did that!! .0535" wide and .067" from the case mouth!!
That's better. I bet your set-up will serve you well..
..t
Safety First..t
-
wildcatter - Posts: 2914
- Joined: Sat Jun 06, 2009 8:30 pm
- Location: In the Middle of Deer Central Station or better known as, in the Thumb of Beautiful Michigan
5 posts
• Page 1 of 1
Return to Reloading for the 450b
Who is online
Users browsing this forum: No registered users and 68 guests