Talk about your 450b reloading experience, ask questions, etc...
Moderator: MudBug
Forum rules
Please try and keep it safe!
This information is the responsibility of the community, not the forum. 450bushmaster.net is not responsible if you blow yourselves up.
by ThatGuy80 » Wed Aug 12, 2020 1:22 pm
Hello all,
I’m new to the forum and 450 BM in general. Thanks for having me and I hope to learn a few things from the group.
ThatGuy80
-
ThatGuy80
-
- Posts: 6
- Joined: Wed Aug 12, 2020 12:57 pm
by peterf225 » Wed Aug 12, 2020 6:13 pm
Hey y’all,
I’m new to forum and the 450BM, but I am an avid reloader and hunter. I have been reading here since I purchased/built my 450BM AR aka Thumper. So far this forum has been very helpful. Hope to keep learning from everyone.
Peter
-
peterf225
-
- Posts: 3
- Joined: Tue Jun 23, 2020 10:36 am
by Al in Mi » Thu Aug 13, 2020 4:13 am
Welcome guys, we all learn something new every day!!
-
Al in Mi
-
- Posts: 1987
- Joined: Sat Jun 20, 2009 8:24 am
by Texas Sheepdawg » Fri Aug 14, 2020 4:56 am
Welcome to all our new members! For all of you who are new this cartridge, I would like to direct you to this conversation first. This post was written by the late Timothy LeGendre himself (RIP), who’s handle here on the forum is Wildcatter.
Whenever you read any posts by Wildcatter just know that you are reading the knowledge from the actual inventor and patent holder of the 450 Bushmaster cartridge and you need to be paying attention.
viewtopic.php?f=5&t=73
-Texas Sheepdawg
http://youtube.com/c/TexasSheepdawg21
NRA Life Member
-
Texas Sheepdawg
-
- Posts: 4732
- Joined: Fri Nov 05, 2010 10:55 am
- Location: North Texas
-
by JM_OH » Fri Nov 06, 2020 9:26 pm
Hello mudbug and the rest of those on the forum.
-
JM_OH
-
- Posts: 16
- Joined: Fri Nov 06, 2020 9:11 pm
by GNTX » Sun Dec 06, 2020 12:37 pm
Hello all. Just joined up here the other day after having read the forum as a guest off and on. I have been trying to get my 18” upper to feed reliably but so far no luck. I am going to do some high frame rate recording of the ejection port at some point to see what is going on. I’m using mags that are set up for 450 with the single stack follower and I have added additional clearance on the front lip of mag to keep the case mouth from catching.
Hope to learn some more and when I get some video to share, maybe some of the experts here can point me in the right direction.
Safe shooting,
Greg
-
GNTX
-
- Posts: 4
- Joined: Fri Dec 04, 2020 11:05 am
by Texas Sheepdawg » Thu Dec 10, 2020 10:02 pm
GNTX wrote:Hello all. Just joined up here the other day after having read the forum as a guest off and on. I have been trying to get my 18” upper to feed reliably but so far no luck. I am going to do some high frame rate recording of the ejection port at some point to see what is going on. I’m using mags that are set up for 450 with the single stack follower and I have added additional clearance on the front lip of mag to keep the case mouth from catching.
Hope to learn some more and when I get some video to share, maybe some of the experts here can point me in the right direction.
Safe shooting,
Greg
I would be interested in seeing pictures of your magazine springs. Laying next to the magazine.
-Texas Sheepdawg
http://youtube.com/c/TexasSheepdawg21
NRA Life Member
-
Texas Sheepdawg
-
- Posts: 4732
- Joined: Fri Nov 05, 2010 10:55 am
- Location: North Texas
-
by kml9705 » Fri Dec 11, 2020 9:33 am
Hi all and thanks for letting me in. I'm new to the 450b and I'm looking forward about learning more about this round. I purchased it primarily for hog hunting on the recommendation of the outfitter we use. I purchased the 450b in the bolt action Mossberg Patriot with the 20" barrel. I almost have it set up the way I want and I'm looking forward to taking it on our annual hog hunt in Florida come January.
-
kml9705
-
- Posts: 1
- Joined: Fri Dec 11, 2020 8:16 am
by GNTX » Sun Dec 13, 2020 7:37 pm
Texas Sheepdawg wrote:GNTX wrote:Hello all. Just joined up here the other day after having read the forum as a guest off and on. I have been trying to get my 18” upper to feed reliably but so far no luck. I am going to do some high frame rate recording of the ejection port at some point to see what is going on. I’m using mags that are set up for 450 with the single stack follower and I have added additional clearance on the front lip of mag to keep the case mouth from catching.
Hope to learn some more and when I get some video to share, maybe some of the experts here can point me in the right direction.
Safe shooting,
Greg
I would be interested in seeing pictures of your magazine springs. Laying next to the magazine.
I can do that. Thanks from a fellow Texan.
-
GNTX
-
- Posts: 4
- Joined: Fri Dec 04, 2020 11:05 am
by Texas Sheepdawg » Sat Dec 19, 2020 8:43 pm
GNTX wrote:Texas Sheepdawg wrote:GNTX wrote:Hello all. Just joined up here the other day after having read the forum as a guest off and on. I have been trying to get my 18” upper to feed reliably but so far no luck. I am going to do some high frame rate recording of the ejection port at some point to see what is going on. I’m using mags that are set up for 450 with the single stack follower and I have added additional clearance on the front lip of mag to keep the case mouth from catching.
Hope to learn some more and when I get some video to share, maybe some of the experts here can point me in the right direction.
Safe shooting,
Greg
I would be interested in seeing pictures of your magazine springs. Laying next to the magazine.
I can do that. Thanks from a fellow Texan.
Did you ever get it figured out?
-Texas Sheepdawg
http://youtube.com/c/TexasSheepdawg21
NRA Life Member
-
Texas Sheepdawg
-
- Posts: 4732
- Joined: Fri Nov 05, 2010 10:55 am
- Location: North Texas
-
Return to Reloading for the 450b
Who is online
Users browsing this forum: Google [Bot], Majestic-12 [Bot] and 160 guests