Hoot wrote:MarkCO wrote:I'd suggest the .260 Remington. Here's why...
Factory rifles are plentiful as is factory ammo. Since is it based on the .308 cartridge, brass is plentiful, cheaper than most of the others and easy to make as well. The 6.5mm projectiles are plentiful with very high BC numbers. A lot of the long range/tactical/precision guys use this round so there is bound to be at least one or two people near you with load data for your environment. The factory loadings come in a variety of flavors including match, hunting and varmint grades. I'd probably go with the Savage 111LRH for a good starter .260.
The 6.5 Creedmore would be a close second place. The barrel life in a 6.5 C will be a tad less than the .260 which burns a bit less powder and has just a bit less MV. But, if the "perfect" rifle for me was only in a 6.5 C, I would not mind it much.
Why not the 6mm/.243 family? Barrel life is the big one. For approximately the same 600 yard performance, your barel life will be less than half that of a .260. The 7mm family, even the 7mm-08 has more recoil, especially when you talk about 600 yard performance.
The 6.5s are the "just right" caliber for a lot of chores and the .260 is probably the just right of the 6.5s. It is fun to shoot, loads are easy to work up and there is nothing tricky about them.
+1
I have a 24" 260 Remington swapping barrel for my LAR-8. Played with it a little this past spring but its another of the too many calibers I bit off to chew this year. Didn't plan on it being the busiest spring and summer in recent years around here. Hope to get more time to play with them next year, now that the daughter is off to college and the house is all spruced up. Truth be told, I've been tempted to send the the barrel off to WC and have it bored and chambered for the 450LM, but college has proven to be yet another money pit
and I have to save my dwindling disposable money for this year's approaching deer hunt in 6 weeks. Hey Tim, need another test bed?
Do pro-Bono barrel jobs? It's a bull barrel with plenty of metal to spare and a rifle length gas port.
Say good night Gracey...
Both are Oh-So correct. The Creedmoor can be made from 308's fairly easily, but the 260 Remmy is just allot less fuss and muss.
It sounds like you already have plenty to make you look good and have made some good choices to Boot. But then again, the grass always looks better, on the far side of the fence, hence all the different cartridges and the fact we are Americans and do need to justify our choices..
..t
Hootster, I can do one on the Cuff for you, but my buddy, who lives near me, requires his Custom Services to be paid for, in advance. His custom work with a single-point cutter is beyond reproach. All of his Cut-Rifled Barrels come out ready for the Wimbledon Cup and I have used him for all of my proto-types (for this very reason), for the last 25yrs. However, because of his renowned work, it doesn't come cheap, it only claims to be the best..t