Page 7 of 7

Re: 350 legend

PostPosted: Mon Jun 24, 2019 12:07 pm
by floydp
Sterling offers brass for the 350 legend now I cant get the web page to up load

Re: 350 legend

PostPosted: Mon Jun 24, 2019 12:11 pm
by cwlongshot
Im thinking you mean STARLINE offers Brass? I see it now 71$/250 pcs


CW

Re: 350 legend

PostPosted: Mon Jun 24, 2019 1:51 pm
by Hoot
$.29 per case Link doesn't seem too bad if you're incined toward this caliber. For everyone in one of the pistol caliber, shotgun zones, I hope the .355 vs .357 issues gets cleared up before the fall hunting season.

Hoot

Re: 350 legend

PostPosted: Tue Jun 25, 2019 1:28 pm
by plant_one
shouldn't be a problem here in Michigan... our rules say 35 cal or greater and 1.6-1.8 case length... which the legend satisfy's.

Re: 350 legend

PostPosted: Wed Jun 26, 2019 8:23 am
by cwlongshot
I have read from a few sources Iowa seems to be the one state with issues. Winchesters mess.

I have seen a letter from Ohio. Its good there. Luckily I dont need to worry I can use what ever.

As for brass costs, Im buying loaded ammo fro under 9$ a box. I pull it and re use properly prepped brass factory primers and powder with a re sized bullet for awesome accuracy.

CW

Re: 350 legend

PostPosted: Wed Jul 17, 2019 9:37 am
by cwlongshot
I ran my “rebuilt” factory loads over the chrony Sunday.

I dont remember exact numbers but ES was close like 25-30 and single digit with a vel average of 2347 fps!

CW

Re: 350 legend

PostPosted: Wed Jul 17, 2019 10:42 am
by plant_one
cwlongshot wrote:I ran my “rebuilt” factory loads over the chrony Sunday.

I dont remember exact numbers but ES was close like 25-30 and single digit with a vel average of 2347 fps!

CW


thats a 16" barrel with the 147gr fmj's?