Barnes 250gr ttsx and coal. (Hoot)
Moderator: MudBug
3 posts
• Page 1 of 1
Barnes 250gr ttsx and coal. (Hoot)
by Mannysdad1+ » Thu Dec 21, 2023 8:26 pm
I’m trying to determine the correct coal for a load using the Barnes 250gr ttsx using 37 to 38 grains of lil gun. Can someone help? Md
- Mannysdad1+
- Posts: 4
- Joined: Tue Dec 19, 2023 10:56 am
Re: Barnes 250gr ttsx and coal. (Hoot)
by Hoot » Thu Dec 21, 2023 9:30 pm
Mannysdad1+ wrote:I’m trying to determine the correct coal for a load using the Barnes 250gr ttsx using 37 to 38 grains of lil gun. Can someone help? Md
Keep in mind that all my work was based upon an AR platform. With grooved bullets, I typically seat to 2.26 COL (overall is one word) and then seat deeper enough to get the nearest groove to line up with the mouth. That way, I could taper crimp down into the groove. Really helped keep bullets from pulling, due to momentum when chambering. Same applies to bullets with cannelures.
Hoot
In Theory, there is no difference between theory and practice. In Practice, there is.
-
Hoot - Posts: 5085
- Joined: Tue Feb 09, 2010 9:34 am
- Location: Minnesota
Re: Barnes 250gr ttsx and coal. (Hoot)
by Mannysdad1+ » Fri Dec 22, 2023 5:52 am
Thanks so much hoot!
- Mannysdad1+
- Posts: 4
- Joined: Tue Dec 19, 2023 10:56 am
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 66 guests